St. Paul's Sound Turbosound TMW-112 kulmamonitori

Turbosound TMW112 kulmamonitori (1490,00) Rajoitettu tarjous 12" Turbosund Flashline monitorista! - järeä (128 dB SPL) ja erittäin hyväsoundinen passiivinen 2-tie kulmamonitori - tehty Englannissa Turbosoundin tehtaalla ! - Tehonkesto: 350 W RMS, 1400 W hetkellinen - Koaksiaalinen ja matala rakenteinen - sisäinen 2-tie jakosudin, mutta ajettavissa bi-amp moodissa ulkoisella jakarilla - Woofer: 12" hiilikuituinen , neodyymimagneetilla (Carbon fibre loaded neodymium motor) - Diskantti: 1" titaani neodyymi driveri (Titanium dome neodymium motor compression driver) - Suuntakuvio 60° H x 40° V - Herkkyys (1 W @ 1 m): 95 dB - Äänenpaine 128 dB SPL - Nimellinen impedanssi: 8 ohm - Kotelo: 15 mm koivuvaneri - Liitäntä: Neutrik Speakon NL4 - Mitat: 314 x 450 x 536 mm (KxLxS) - Paino: 19 kg FLASHLINE MONITORS (UK) TMW-112 The TURBOSOUND TMW-112 is a compact 1,400 Watt switchable passive/bi-amped floor monitor consisting of a co-axial carbon fibre loaded 12" neodymium low frequency and titanium dome 1" neodymium high frequency combination driver in a reflex loaded enclosure designed for concert touring. The co-axial drive unit is matched with an exponential horn flare for improved acoustic loading and controlled coverage. Both HF and LF coils utilise the same neodymium magnet assembly, which gives better efficiency and reduced weight. This allows the creation of a minimal footprint monitor wedge which, combined with a35° projection angle and 60° horizontal by 40° vertical dispersion pattern, is ideal as a vocal monitor on smaller stages where space is limited, while its low profile maximises audience sightlines. The 15 mm (5/8"") birch plywood cabinet is equipped with two flush recessed handles, and Neutrik speakON* NL4 connectors are provided at each side for tidy inter-connects. The cabinet is finished in semi matt black paint finish and includes a curved profile perforated steel grille backed with reticulated foam and supported by a steel reinforcing strip positioned across the front of the drive unit. A recessed pole mount socket is provided for use on speaker poles or tripods. Dimensions (H x W x D): 314 x 450 x 536 mm (12.4 x17.7 x 21.1") Net Weight: 19 kg (41.8 lbs) Components: 1 x Coaxial 12" (305 mm) LF Driver /HF Compression Driver Frequency Response: 75 Hz - 18 kHz ±3 dB, 60 Hz- 20 kHz ±10 dB Dispersion: 60° H x 40° V @ -6 dB points Sensitivity (1 W @ 1 M): 95 dB Power Handling: LF: 350 Watts Continuous, 1,400 Watts Peak HF: 80 Watts Continuous, 320 Watts Peak Passive: 500 Watts Continuous, 2,000 Watts Peak Calculated Max SPL: 122 dB continuous, 128 dBpeak Nominal Impedance: LF: 8 Ohms HF: 8 Ohms Passive: 8 Ohms Crossover: Passive Crossover Network at 1.3kHz, Switchable Active/Passive Construction: 15mm (5/8") Birch Plywood Finished in Black Textured Polyurethane. Two Recessed Carrying Handles. PoleMount Socket Grille: Black Powder Coated Perforated SteelBacked with Foam Connectors: 2 Neutrik speakON* NL4 wired: pin1+:LF positive, pin1-: LF negative, pin2+: HF positive, pin2-: HF negative Spares & Accessories: LS-1227 12" (305 mm) Coaxial HF/LF Loudspeaker